SUPERMAX FLEX
SUPERMAX FLEX is a RAPID CURING high performance, moisture cured, single component, glass fibre-reinforced polyurethane, for use on new and existing flat roofs and it has been developed to reduce project time and using the latest technology for enhanced moisture tolerance to better suit the UK climate.
- Rapid curing as standard (compared to regular PU systems) with a curing time between 6 – 12 hours, compared to 24 hours with standard systems.
- Can be installed onto existing substrates as well as new ones.
- No limitations in roof size
- Totally seamless
- Easy application
- Liquid formula allows complex detailing to be simplified.
- Single pack formulations – Less material waste and packaging
- Fully bonded to deck system – resistant to wind uplift
- Tolerant to damp surfaces
- Once cured, performs at extreme temperatures ( -40°C / +90°).
- 25 Year guarantee with 225gm CSM reinforcement or 60gm Polyester Fleece.
- Mid-grey in colour
- B Roof (t4) fire certification and tested in accordance with EAD 030350-00-0402 (Replaces ETAG 005).
Application METHOD
- Ensure the substrate is clean, free of dust, oils, grease or loose parts.
- Apply a coat of SUPERMAX FLEX Primer (where required) onto the surface and allow to cure.
- Apply resin onto the deck, then place the reinforcement on top, then apply another coat of resin ensuring the reinforcement is fully embedded and saturated. Allow to cure.
- Once cured, lightly sand the surface and tidy up any loose fibres and wipe clean.
- Apply the second coat of resin to act as a topcoat.
- A non-slip finish can also be achieved by incorporating slate granules or quartz aggregate.
Note: the information above is a brief installation guide, we would recommend attending a training course on how to use the system correctly or read the full manual to make yourself familiar with the complete system.